 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Moentrol Hot water issue
I have a Moentrol single handle shower control with diverter. I recently changed the Cartridge and Diverter. I also finally figured out why the hot was cold and cold was hot, simple adjustment.
The issue I have now, and always ave had, is in order to get hot enough water for a shower I have to have the knob on the 10 o'clock position as opposed to 12 o'clock. Is there an adjustment for this or is it possibly a bad Balancing spol or Stop Check Valve? |
||||
Check out some similar questions!
Had hot water yesterday. Temp overnight was -3 and now no hot water at any tap. The high got up to 26 for a high and still no hot water in the RV. Haven't been using the floor furnace; so thought that might be the culprit; but switched off the small poratbles and let the furnace (both front and...
Recently, we started to have hot water issues when one more than one person has taken a shower. The water temperature is goes from lukewarm to cold. I do have a insulation blanket surrounding the water heater. The water heater is about twenty years old. Is it possible that the water heater is...
Why do I have hot water in the sink of my bathroom but the shower does not get hot?
Our shower loses hot water while the bathtub in the same bathroom remains hot. Have the pipes to the shower lost their insulation or what?
We have 2 bathroom on the second floor which is back to back. The 2nd bahroom do not have hot water issue but the shower in the master bedroom lacks hot water beginning recently. Water can run 10-15 minutes and still no hot water. There is an Intermatic control and Warm touch & we never questioned...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
