Ask Experts Questions for FREE Help !
Ask
    heavy_kevie's Avatar
    heavy_kevie Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 24, 2011, 09:09 AM
    No cold water on american standard cadet 3 handle shower fixture?
    Cold water valve to shower is on. Fixture is about 1 year old.
    Appzalien's Avatar
    Appzalien Posts: 540, Reputation: 57
    Senior Member
     
    #2

    Jan 24, 2011, 12:11 PM
    Does the cold water pipe run near an outside wall and the temperature outside is very cold. It may be frozen if it happened over night. I know is got below zero in the North Eastern US.
    heavy_kevie's Avatar
    heavy_kevie Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 31, 2011, 05:24 PM
    Thanks, that was it. Lost heat in the house for 12 hours, got down to 52 degrees. The pipes don't travel along an exterior wall but when I removed the section of wall where the pipe travels, it sure was cold. Must have an air leak, going to have to check it out. Fortunately, the pipe didn't burst so all is well. Thanks aggain!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

American Standard Toilet Handle [ 0 Answers ]

I own an apartment building with several American Standard toilets from the early 1960's. I know that the original toilet handles on those are a little different than those available as universal replacements now. The cutout hole in the toilet tank where the toilet handle fits into is slightly...

How do I get the cold water to come out of the shower head on a three handle shower f [ 1 Answers ]

In my shower I have a three handle system. When I turn on both hot and cold the turn the shower handle to divert the water to the head, the hot water comes out of the shower head but the cold water comes out of the water spout. How do I get the cold to go to the shower head?


View more questions Search