Ask Experts Questions for FREE Help !
Ask
    defendall's Avatar
    defendall Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 23, 2011, 02:23 PM
    Toro snowblower 521 adjust belt
    How do I tighten the auger belt on a toro 521 snowblower
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Jan 23, 2011, 03:05 PM

    What model 521 do you have.
    I thought the augers on those drove off the disk plate same as the traction .check out the disk and drive pulley
    If you check on the cable there might be a adjusting nut that will tighten tension thers about three different models of 521,
    Luck
    defendall's Avatar
    defendall Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 23, 2011, 03:55 PM
    Comment on DG's post
    The toro 521 is model 38052. Everything turns fine and fast but even a small amount of snow stops it up and it gets clogged. I do not know what to do.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #4

    Jan 23, 2011, 04:22 PM

    Check on the auger see if you can spin it with the motor off if so it should be real hard , they have shear bolts that go through them could be one of those are broke.
    Other wise make sure the engines running fast enough at high rpms
    Luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Toro snowblower-with gas [ 1 Answers ]

We left it outside for 2 days in the cold and now it won't start. What could be the problem!!

How do you adjust the governor on a 8Hp tech snowblower? [ 1 Answers ]

I am pretty sure someone has messed with the governor on this 8hp tech. snowblower. It starts and idles up move it to wide open and it runs wild.. very wild.. how do you adjust it or am I looking in the wrong spot? Thanks..

Toro snowblower [ 4 Answers ]

Hi Have a 3.5 HP toro snowblower Model #38182 serial 21004340 with a Tech eng. With electric start The elect starter does not turn the flywheel but starter motor spins. The gear does not seem to engauge the flywheel or at least it looks like It is not engauged and I can put a finger...

Husqvarna 521 SSE Snowblower will not throw snow [ 1 Answers ]

Husqvarna 521 SSE Snowblower is about 5 years old and will not throw snow. We took on the slack in the calble that controls the belt pulley via the adjustment screw on cable but still will not throw snow... wants to simple push it out front of augers


View more questions Search