Ask Experts Questions for FREE Help !
Ask
    armand1139's Avatar
    armand1139 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2011, 11:48 AM
    Olsen DuaMatic HTL-100B Oil Furnace Blower Motor Replacement.
    I can't seem to find a replacement for this motor. GE Model 7J402AS1, 120vac, 1/3hp, 1725rpm, 6.4amps. Thank you

Check out some similar questions!

Furnace blower motor replacement. [ 1 Answers ]

Need to replace a direct drive furnace blower motor. I have a motor on hand that states for belted blower/fan duty. Will this work? Thanks Rick

Replacement furnace blower motor compatibility [ 4 Answers ]

My dead 20 yr old Weatherking furnace blower motor is a 1/2 hp four speed, 1075 rpm Westinghouse. Brown and white wires go to capacitor, with yellow (med low) and black (high) connected, and blue and red capped off. Motor schematic shows white and yellow as line wires. Proposed new motor (AO...

Oil furnace blower motor does not turn on [ 1 Answers ]

Oil furnace blower motor does not turn on, in the "auto" setting, but will turn on in the "on" setting. Replaced thermostat, but still the same problem.

Replacement Furnace Blower Motor [ 4 Answers ]

Hi, I have an older (~40 years, the original with the house) Coleman furnace. The blower motor (General Electric, 1/6 hp, 110 V, 60 Hz, 3.6 amps, PH 1, 1725 rpm) burnt out the other morning. I went to the local shop (RONA) to find a replacement and they didn't have the exact motor. Instead,...

Furnace Blower Motor replacement [ 3 Answers ]

I have a Comfortmaker furnace with General 90 controller. My blower motor stopped working and when I try to turn it on it gets hot, smells like something burning and no air. Capicator was tested and it is OK. Motor is driving excessive current and just heats up. HVAC technician quoted $700 to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.