Ask Experts Questions for FREE Help !
Ask
    tinman180's Avatar
    tinman180 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2011, 05:40 PM
    Where should the blower be?
    I have replaced my gas furnace with a wood furnace. I try to use the gas blower . I think it is blowing way 2 hard. I put a smaller blower on. It seams to not blow much at all. Should the blower be in the duct work. Or back of the furnace?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Jan 22, 2011, 07:15 PM
    You want to push air through the heat exchanger.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

45692-001 blower control board will not turn blower on in either heat or cooling mode [ 2 Answers ]

Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...

Airflow:possible to use heater blower in addition to A/C blower? [ 20 Answers ]

Hello to everyone using the site, Current setup is a coleman electric furnace and there is a carrier unit outside the home for a/c. I am in a mobile home built 1995 sized about 1780 sqft, living in Florida where the temp gets over 90 most days right now. Problem I am having is that I do not...

T-start fan on/furnace blower on, AC w/fan on/auto, blower off [ 8 Answers ]

If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...

Heat blower works ac blower won't shut off. [ 1 Answers ]

Hello, I am having trouble with my RTH230B Honeywell. I have a Gas furnace and an outdoor ac unit hooked up to a blower and the blower has a heat off cool setting on a switch on it. Our when set on heat everything works as it should. BUT as soon as I turn the blower to cool it turns on and...

Blower not working and blower running all the time [ 2 Answers ]

I have a Lennox electric furnace that's about 10 years old or so, the elements come on but no blower. There is a summer fan switch that will make the blower run when switched on, but it will not come on with a call for heat. Also at my work, there is a york gas pack that is probably 15 years old....

View more questions Search