 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Ultra Wash Dishwasher 685 bottom rack
Bottom rack has folding tines. Gray plastic clip (W10175278GN) that holds folding tines in upright position falls off when you slide the rack in and out to load/unload. Clip appears to hit the water inlet opening on the left inside wall. Is there a redesigned clip to replace the original or another way to fix?
|
||||
Check out some similar questions!
Kenmore Ultra Wash dishwasher 665.17779990 left a lot of water in bottom yesterday. When I pressed drain button, I heard pump come on for 2 seconds, then stop. After 1 minute, pump again came on for 2 seconds and stop. Did this once more, then drain light went off. What do I check first?
I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...
Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385
I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
