 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane gas furnace?
Everything is working correctly but when it has to run for a while to bring the temp up I hear the blower motor restart and the flame relight. It may do this 2 or 3 times usually near the end of a long warm up cycle but I have never heard it during a normal run cycle to maintain the temp. I have monitored the supply voltage and it is OK. Any ideas?
|
||||
Check out some similar questions!
My gas heater is in the attic. When the attic get real cold (near or below freezing) the heater shut down. With a cold attic the igniter will come on, the gas will come on, then the flame, then 20 seconds later the gas shuts off. When the attic is not so cold every thing works fine. Temputure...
I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(
I have a Trane XL 80 Gas Furnace that is not working properly. The LED trouble light flashes twice repeatedly. The burners will not light but blower runs just fine. I can turn off the breaker for a few minutes (while I am checking everything else out) and turn it back on and everything starts...
I have a trane furnace I have power up to the junction box where is the step down transformer located and how do I test it sure could use a electrical diagram of this system where do I get one TRANE gas fu
The Gas furnace is running however there is no heat coming out from the furnace directly and the blower is not coming on. The heat is set to 68 however it is 64. There is no blockage in the vents. Why is this happening. We just had an ice storm but it seems like whenever it gets very cold outside...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
