Ask Experts Questions for FREE Help !
Ask
    juslisubrie's Avatar
    juslisubrie Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2011, 12:32 PM
    My PC always turn off after start
    My PC always turn off after start sometimes display press F1 to reeboot I press but nothing happen and its still continue display same things press F1 to reboot
    ITstudent2006's Avatar
    ITstudent2006 Posts: 2,243, Reputation: 329
    Networking Expert
    		  
    #2

    Jan 20, 2011, 12:35 PM

    Do you see any type of screen before it shuts off? Can you enter BIOS or selctive startup before you receive this message?
    NeedKarma's Avatar
    NeedKarma Posts: 10,635, Reputation: 1706
    Uber Member
    		  
    #3

    Jan 20, 2011, 12:42 PM
    If you see a quick blue screen before it shuts down or restarts then it's very often a corrupted Registry and there are tough to fix, certainly not by directions in a forum. Your best hope is the repair function of your OS CD.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My ge dryer won't start just a buzzing noise when I turn the start button [ 3 Answers ]

It was working fine, just switched the loads and now just a buzzing noise when I turn the start button

04 silverado won't start / turn over [ 4 Answers ]

Full power to the truck . Brand new battery cable connetions are good /not corroded. Turn the ignition on and hear a quiet click but nothing happens , It does not do it all the time and once I leave it for a while it will fire up. Seems to do it when its cold outside and the truck is cold.

Truck will not start but will turn over. [ 3 Answers ]

I have a 1980 Ford F-100 with 45,000 original miles on it. Over the past month or so the truck has had trouble starting. I checked the cap and rotor and saw there was a significant amount of corrosion so I replaced the spark plugs, wires, cap, rotor, and air filter. The problem stopped for a few...

Truck will turn over but not start [ 2 Answers ]

Hello... I own a 98 ford ranger that is having problems starting. In the morning when I get ready to go to work the truck will turn over but will not start. However, the remainder of the day when you try to start the truck it will start up fine. In the mornings I jump start it and it starts...

Murray will turn over but not start [ 12 Answers ]

I have a 12 hp Murray Riding mower it will not start unless I remove the filter nad put gas directly into trhe carb. Then of course onece the gas burns it goes dead. Can someone tell me what to try please

View more questions Search