Ask Experts Questions for FREE Help !
Ask
    Godivachocc's Avatar
    Godivachocc Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2007, 12:00 PM
    Kenmore Dryer Issues
    I have a kenmore dryer model # 110.74952300 i moved it recently and now it won't heat. Is there a pilot and if so where is it and how do i light it? Help!:(
    Godivachocc's Avatar
    Godivachocc Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 27, 2007, 12:15 PM
    Never mind. It has an ignighter and my husband (the genius) didn't turn on the gas. It's working now.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer [ 4 Answers ]

My dryer go on but there's no heat I just had it fix for the same problem. I was told it had a breaker that may turn heat back on. HELP I don't know where it is. Thank you.

Dryer Issues [ 2 Answers ]

I have a kenmore catalyst dryer about 3 to 5 yeas old. It just started to default to the high dry cycle/check lint screen flashing/constant beep until dry cycle is completed/and will not allow to change to any other settings. I pulled the plug overnight hoping that it will recycle itself but did...

Kenmore Washer issues [ 10 Answers ]

I have a Series 70 washer with an odd problem. The machine runs fine until it gets to the spin cycle. It will drain the water, but not spin on its own. If you catch it trying to drain, you can open the lid and close it and it will start spinning and resume it's cycle. I have heard possibly the...

Kenmore dryer issues [ 4 Answers ]

I have a Kenmore dryer that has stopped heating. I got a multimeter and tested thermostats, fuses, and the element. Everything has a reading but the high temp thermostat, so I am assuming this is the issue. My question is I looked at it and the thing has a rivet holding it in. How would I go about...

View more questions Search