Ask Experts Questions for FREE Help !
Ask
    brummie girl's Avatar
    brummie girl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2007, 03:26 AM
    Stop switch
    How to change a stop switch on a ford falcon au 1999
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 27, 2007, 10:23 AM
    If you are in the US I'm pretty sure there is no such thing as a1999 Ford Falcon. Maybe a 1969. I'm guessing the a stop switch is the brake light switch that turns on the taillights during braking. If you lay on your back and look up at the brake pedal arm you should see two wires and a small switch. When the pedal is depressed the arm moves away from the switch and opens the circuit. When replacing this switch you will need to adjust the height of the switch so it makes good contact when your foot is off the pedal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Networking Switch 2 Switch [ 2 Answers ]

I have 2 buildings I want to network together. They are currently being linked by 2 hubs but I would like to replace them with switches. Is there any known performance issues with linking switches together. (e.g. Bandwidth is less on the uplinked switch) I think I already know the answer but I'd...

3-way switch as transfer switch? [ 47 Answers ]

Why are transfer switches so expensive? What's wrong with Using a 3-way switch for each circuit that I want to connect To my generator?

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

Hunter fan switch ---won't stop [ 1 Answers ]

Just replaced a hunter 3 way fan switch. Swear I matched up the wires correctly. The light works properly off a second pull chain, and the wall switch cuts power to both fan and light. The fan definitely operates on 3 speeds, BUT... the off position on the pull chain, doesn't stop the fan...

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search