Ask Experts Questions for FREE Help !
Ask
    glebar's Avatar
    glebar Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 15, 2011, 06:10 PM
    Hunter thermostat 42122
    I have hooked up the new Hunter thermostat replacing a Rheem 41-20804-15. The system works but the aux heat stays on the whole time the heat pump is on. Shouldn't the heat pump comressor work for a while by itself before turning on the aux heat?

    I did hook up the old termial (W2 and E) both to the Aux connection on the new one
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Jan 15, 2011, 10:12 PM
    Sounds like you need to carefully look at the wiring instructions again,, although the Hunter tstat (most) are junk if you get lucky and get it to working,it won`t last long,, take it back now whiles its still new

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Hunter thermostat 42122 [ 4 Answers ]

we are trying to install a new hunter thermostat (42122). We have labeled our wires as directed except we have a brown wire that was considered x in the old thermostat. We don't know where to put the brown wire. Is it considered a common (c) wire?

White rogers thermostat to hunter thermostat [ 3 Answers ]

I am replacing my old white rogers thermostat with a new hunter thermostat. Is a 4ton unit with no heat pump just regular heating coils. The old thermostat some of the labels fell off and the only ones that I see are the yellow, green, red and black that have labels. The colors of my wire that...

Lennox T90H110A137 Thermostat / Hunter 44665 Thermostat ? [ 1 Answers ]

I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to connect it to a Hunter 44665 Thermostat which has the following terminal letters: Y1 RH

Replaceing honeywell 3210d thermostat with hunter 44668 thermostat [ 0 Answers ]

Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.


View more questions Search