Ask Experts Questions for FREE Help !
Ask
    oldblue57's Avatar
    oldblue57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2011, 03:25 PM
    No heat, igniter not heating up, thermofuse is good.
    The vent is clean, I replaced the igniter, thermofuse and tested the thermosensor next to the igniter and it has continuity. Any other suggestions? Oh, its only 15 months old... piece of ----... thanks

    Maytag neptune #MDG5500AWW

Check out some similar questions!

RE No Heat.Igniter [ 2 Answers ]

Another question, The igniter does not glow when the furnace blower comes on.. I did check it out with diagnostic test and it glowed during the test

My 92 accord won't start coil has power igniter is good but no fire from the coil [ 4 Answers ]

Please help need suggestions asap call r text asap 3372131323

Igniter won't fire blower comes on and then gas but not igniter, status light on [ 0 Answers ]

Forced Air Heating - electric igniter lights up but no flames [ 1 Answers ]

Hi My home meating unit has a problem After turning on the thermostat, the electric igniter lights up for ~15 seconds but nothing happens, no flames , and than it shuts off, and tries again 1-2 minutes later. I've check the gas pipe and control that's in the 'on' positions. Could it be...

Heating igniter doesn't ignite [ 2 Answers ]

I have a Carrier gas heating system that is several years old. The electronic flame igniter (probably not the correct name) sometimes clicks repeatedly without lighting the flame. Then it quits clicking. I can get it to come on by turning the thermostat to off and then back on. It usually lights...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.