Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Turning on AC blows control board fuse and 24v transformer
[ 15 Answers ]
I read https://www.askmehelpdesk.com/heating-air-conditioning/c-keeps-blowing-fuse-95884.html which was very informative. My issue is with a Carrier Weathermaster 8000 furnace and York AC. The heat works fine, the fan only works fine, I turn on the AC and the LED blinks code 34. I replace the...
Trane control board fuse blowing
[ 6 Answers ]
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
BRYANT Furnace blowing 3-amp fuse on control board
[ 1 Answers ]
I have a Bryant M/N 383KAV036070AGJA, S/N 3097A08913, Series G furnace with central air that is blowing the 3-amp fuse on the control board. The furnace has been serviced numerous times over the past two years for various problems by multiple service companies. The control board was even replaced...
My Lux aire control board fuse blows.
[ 1 Answers ]
I have a heat pump systems a LuxAire made by York it is ony 4 year old the model number is: F2FP048H06G I have isolate all t/stat wire in and tested for possible grownding with negative result. I did rung the A/H fan on on and works find but when I set the unit for cooling or heating it blows...
Furnace control board fuse keeps blowing
[ 1 Answers ]
Hi, I have a Carrier furnace 48GS-036090311TP with a Honeywell T8401C thermostat. I can run the fan on continuously but when I put the Heat to ON on the T-stat, the 5 Amp fuse on the control board (LH33WP003A) in the furnace blows. The sequence is like this: 1. Fan only operation is running... View more questions Search
|