 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower does not run long enough
Have set the thermostat settings at 225 for high and 100 for low maximum setting is 275 heats up blower comes on but does not stay on long enough maybe 45 seconds to a minute. Stove is hot enough that it should stay on but doesn't. I have toyed with the settings don't know what to do. P.S. I have bent a wire so I can hold the thermostat on until it starts to blow cold air what's the problem with it? Is the thermostat bad?
|
||||
Check out some similar questions!
Hello, I have a Ruud furnace and I want to check my blower motor by applying 120v directly to the motor. The motor has five wires red, black, brown, white and blue, which wires should I plug into the receptacle red and black? When I set the tstat to fan or auto, all I get is a buzzing sound from...
When the thermostat turns on, I hear the furnace ignite and burn for 4 minutes before the blower turns on. Is this a normal length of time? I have an older LP furnace
Programmable thermostats are currently off, however the blower is running. Doesn't run all day but most of the time
“The recent global economic crisis is now evident in the declining demand worldwide and across many markets. Discuss the short-run and long-run equilibrium effects and the efficiency implications of this decline in demand on firms operating in perfectly competitive markets and firms in monopoly...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
