 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
LP furnace in a mobile home. Was working fine until power outage 2 days ago. Plenty of fuel in tank(about 100 gallons) Got up the next day and house was cold. Turned thermostat off then back on and heat came on. Came in from work that night and furnace wasn't working. Will start to work, fan...
I am a Unitarian Universalist Pagan who works for the Catholic Church. I love my job and the people I work with. However, occasionally--and naturally--issues of religion come up. I am invited to attend liturgy services, asked to lead prayer, and sometimes dance around questions about my...
I have a Goodman furnace, model #GMH80703ANAB, it is about 2 years old. It tries to turn on, but then stops. Occasionally it will turn on and begin to ignite the electric ignition, but then will turn off before blowing out any heat. To my knowledge there hasn't been any water damage to it. I have...
Some of my radiators are not working properly. I tried bleediing them a few of them started to warm up but I still do not hear the water coming through them. I wanted to know if there was something else I can do in order to get them working. It's cold here in Pittsburgh, PA
We set our thermostat on 70 and by 12 noon it reads 80 degrees. The air that comes out of the vents is very low pressure, like there is a blockage. The maintenance crew has worked on it several times, but no improvement. The air stays on all day and night and only starts to shut off and on at...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
