 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell thermostat to nutone heat pump !
I have a nutone three ton unit and a honeywell thermostat pro 5000-511od. I need to know how the wires in the thermostat are suppose to be connected. Not all heat pumps are the same, this one has that reverse thingy going on, and I am not certain what colors are to be connected to what. Can you help me.
|
||||
Check out some similar questions!
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
I need to replace a Honeywell T841A1001 thermostat on a heat pump, and of course they do not make this one anymore. The old thermostat wiring was as follows" R = Red O = Orange G = Green Y = Yellow W2 = White with Jumper to X
I live in a 20 yr old condo with 2 Heating Systems that were described as "heat pumps" and recently decided to replace the thermostats from the 24 year old controls to Honeywell RTH7600 series touch screens. Ran into some issues as the wiring from my old thermostats didn't exactly line up with...
I am trying to install a Honeywell TH4210D thermostat to a Goodman PHKJ030-1 heat pump. Most wire colors match up but the Blue wire seems to be confusing. I'm not sure if it is a common wire on a Goodman. Also are there any jumper wires I need to install or remove?
I have a Rheem heat pump with auxiliary and emergency heat. My current thermostat is a Seco TA-2000 with the following wiring configuration: B W2 X R G and a piece of wire connected between E and W2. There's also an orange wire that's not connected to the thermostat. The Honeywell manual does not...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
