Ask Experts Questions for FREE Help !
Ask
    RobCT's Avatar
    RobCT Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 10, 2011, 03:14 PM
    OSB fumes
    Bought some OSB to put under a new countertop. The fumes are strong. Should I use plywood to fill the 3/4 " space instead?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 10, 2011, 03:33 PM
    OSB does have a larger amount of binder adhesive than plywood. Usually the smell goes away. If you are concerned, go with the plywood. The extra $30 may be worth the worry.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

OSB fumes, for how long? [ 12 Answers ]

If I use OSB for the walls of a 10x12 workshed, with no interior sheathing... how long will I be breathing the fumes? Does it off gas a lot initially or is it steady over it's life. If I cover it with siding of some kind, does this prevent the off gassing to the outside and just channel it to the...

OSB subfloor [ 2 Answers ]

I am laying hardwood. I had Particle board am replacing with OSB. I laid 3 sheets with cuts. Then I saw the THIS SIDE DOWN pinted on the boards. :mad::o My 3 borads are shiny side up. Is this going to cause a problem or should I remove and re-attach. I am working on a remodel and need...

Protecting OSB [ 4 Answers ]

After framing, roofing, and putting up OSB, how long is it safe to leave standing, open to the weather, before covering with Tyvek?

OSB repair [ 1 Answers ]

An outside faucet leaked for some time inside the exterior wall before it was noticed. Now on investigating I find the OSB sheathing to be rotting in this area. The outside wall is synthetic stucco and interior wall cedar. My access to the area in question is a 14" x 14" access panel and 3" along...

OSB used in construction [ 8 Answers ]

Can I use this type of board for walls and roof and floors for my shed if I intend to cover the exterior in sheetmetal?. if so, should I paint all of the OS.. just in case it rains while I'm building?. this is going to be a 1 man job so its going to take me awhile.. thanks for any help


View more questions Search