Ask Experts Questions for FREE Help !
Ask
    geepee's Avatar
    geepee Posts: 0, Reputation: 1
    New Member
    		  
    #1

    Jan 9, 2011, 03:05 PM
    Can Honeywell RTH6350D1000 work with an old Intertherm system B2BV036K-B?
    I have a Intertherm Heating/Cooling w Heat Pump: B2BV036K-B.? Years
    VOLTAGE: 208/230
    HZ: 60
    FLA: 2.6
    HP: 1/3
    Heat Kit: H1HK010H-01
    I am replacing an old Intertherm thermostat with a dial that had 2 mercury tube/switches with a New Honeywell RTH6350D1000:
    Old thermostat Pin///Wire Color///New Thermostat Pin
    R ///RED/// R/RC
    E/W2 ///BLACK/// E
    Y ///YELLOW/// Y
    O ///ORANGE/// O/B
    G ///GREEN/// G
    W2/E ///WHITE/// AUX
    L ///BROWN/// N/U
    X ///BLUE/// N/U

    New Thermostat set to Function/System type 1/5: Heat Pump-Outside compressor for heating cooling with backup or auxiliary heating.
    Set Schedule. And test.
    New Thermostat setting can turn on fan but no heat or cool.
    Put old thermostat back now only "Emergency heat" indicator/heat comes on.
    Tried new again now nothing comes on.
    Left it with the new one connected for now. What am I doing wrong? Is there a reset for the Heater/Cooler?

Check out some similar questions!

Honeywell system A/C not working? [ 7 Answers ]

Holy Crap it is 82 degrees in the house. I have tried many different settings, read the dang manual can't find out how to get the a/c to come on. Should it be on Auto or should I have it on fan? What temp to set it to? I just tried to look through the frequently asked questions but it didn't...

My intertherm gas furnace fan will not work on auto? [ 0 Answers ]

The furnace comes on and heats up, the fan comes on for about 30 seconds then shuts off. The fan will run when I switch to manual on the thermostat.

Intertherm system for mobile home [ 1 Answers ]

Intertherm air conditioner/ furnace in mobile home. Furnace worked fine blew heated air - air conditioner comes on outside but does not blow inside. Air conditioning unit checks out fine - why does it not blow inside?

Replacing intertherm with honeywell rth7500d [ 3 Answers ]

I have a nordyne/intertherm thermostat on heat pump hvac system. Has seven wires: E- emerg heat W- aux heat O- RVS Cooling G- Fan R- 24 Vac hot C- 24 VAC Comm ...

Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217 [ 2 Answers ]

I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.