Ask Experts Questions for FREE Help !
Ask
    jchoo's Avatar
    jchoo Posts: 69, Reputation: 2
    Junior Member
     
    #1

    Jan 9, 2011, 10:06 AM
    Install neo angle shower base
    How does one install a neo angle shower base in a basement? I'm having difficulty understanding how the drain is put together. I've got a 2" pipe coming up from the floor. The instructions state that I shouldhave a 5" dia hole around the 2" pipe for the drain assembly to sit into.:confused:
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 9, 2011, 11:22 AM

    What brand and model shower did you buy? To make room for the shower drain assembly you may need to chip away some concrete around the drain pipe.
    jchoo's Avatar
    jchoo Posts: 69, Reputation: 2
    Junior Member
     
    #3

    Jan 9, 2011, 07:09 PM

    Yeah I chipped away the concrete around the drain pipe for the drain assembly. Wasn't to bad, it only took approx 1/2 hr. Thanks for the input

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair leak on corner of neo angle shower [ 5 Answers ]

Hi, We have installed a neo angle shower a few months ago in our basement. It worked find and we followed the installation instructions. However I have noticed that both corners of shower (byt the wall and glass frame) are leaking now. I removed the caulking and ran water to see where the leak...

Leaks in Neo Angle shower [ 9 Answers ]

My home (about 8 years old) has a Neo-Angle shower that has been leaking between the base and the metal frame (that holds the glass) that sits on top of it. I've tried removing the caulking both inside and out of the shower, cleaning and drying thoroughly the area before I apply new caulk, but...

Base installation on Neo Angle 38" corner shower unit [ 2 Answers ]

I am installing a Neo Angle 38" corner shower unit purchased at Home Depot. The instructions are less than helpful so I am turning here for some help. First some background. I am building a bathroom in my basement, so the shower is installed ontop the concrete floor and one of the corner walls...

Replacing neo angle shower base [ 1 Answers ]

I am replaceing a neo angle shower base in my basement. How does the base/shower drain come off the pipe? Is the drain cemented/glued to the pipe? If so, how would I cut it? Could it possibly be some sort of compression nut? Thank you! Robby


View more questions Search