Ask Experts Questions for FREE Help !
Ask
    qnd2011's Avatar
    qnd2011 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 7, 2011, 09:28 AM
    What is causing my Amana 80 Commander to give lock out code and blowing cold air ?

Check out some similar questions!

York furnace flash error code 6 times (blowing cold air) [ 3 Answers ]

Hello, I have a York (forced air) gas furnace that's 9 years old. Every winter it seems like I have to replace the pressure switch ( round switch with 2 connections & air hose). I hear the blower come on, burners ignite and then within a few seconds they go off with the red light flashing 6 times....

Philco central heater only blows cold air, and will not stop blowing cold air. [ 0 Answers ]

Philco central heater only blows cold air when it should be blowing hot air. And it will not stop blowing even when I turn off the heat. The fan is not on it is on auto.

A/C is blowing warm air/outside is blowing cold air [ 1 Answers ]

I have a Goodman A/C for about 4 years, today my a/c started blowing warm and the outside unit is blowing cold air. Just last week I replace the filter and the a/c want out, the tech replace the capacitor because the fan went out. Now today the fan is working but the a/c is now blowing warm air...

Furnace blowing cold air.starts out warm, goes to cold. [ 6 Answers ]

Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.