Ask Experts Questions for FREE Help !
Ask
    jshaw55's Avatar
    jshaw55 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 6, 2011, 08:18 AM
    Need an igniter for a gibson warm air furnace model number kg6rc080c-16b
    I a igniter gibson warm air furnace with hot surface ignition. Model number kg6rc080c-16b serial number kga010905065

Check out some similar questions!

Warm air blows when furnace is on, cold air does not blow through vent when A/C runs [ 1 Answers ]

When the furnace (forced air gas) is on, warm air blows from all the vents. When the central air conditioner is on in the summer, the vent in one of the bedrooms does not blow cool air. Why?

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. A [ 1 Answers ]

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay

My gibson gas furnace is blowing cold air not heat [ 0 Answers ]

My gibson gas furnace is blowing cold air. I turned the unit off and on and adjusted the thermostat. Still cold air is blowing

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. A [ 0 Answers ]

My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay

Furnace Heating : Cold air blowing from vent from one level/ Warm air in the other [ 1 Answers ]

Ours is a 2 level house (1995), both levels heated by the same furnace ( YORK Multiposition Gas-Fired Furnace MODEL P2MP 32-112 MBH OUTPUT) . We have two digital thermostats (Hunter Programmable type) located on each floor. We were out for a few days and when we came back the lower level is getting...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.