Ask Experts Questions for FREE Help !
Ask
    roned's Avatar
    roned Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2011, 05:04 AM
    How to start my own roof truss plant?
    Specs and info how to start my own roof truss plant.
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Jan 6, 2011, 05:16 AM
    Well firstly and most important you will need a shed load of CAPITAL $$$$$
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #3

    Jan 6, 2011, 07:23 AM
    You don't go online and in 1 short sentence get 'specs and info' on how to start any business (and if someone is in that business, why would they fork over all their hard work)?
    You will have to spend weeks if not months just researching the demand, start up costs, local ordinances, federal and state taxes, lag time between raw materials and sales, and so on. Onanonanonanon...
    Good luck.
    When building and real estate was half of our burgeoning economy, roof trusses would have been a good venture. Right now, you could probably buy out a roof truss company for it's debts.

    Not to discourage you or anything.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to find ibeam size for roof truss [ 5 Answers ]

I am building a 40&60 metal building I need to build a 60 foot center truss . Iwant to use a 18 inch 35w ibeam but I am not sure if the size is right . The roof pitch is 12/2 with 6 inch insulation and 26 gauge are panels

Roof truss project questions [ 4 Answers ]

I built my own rafters and roofing system for our 12x31 guest house. Now we have a 2264 sf slab that will soon have ICF walls in early/mid-september. The house has 3 basic areas and will have 3 gabled roof sections of 6/12 pitch. 2 of the 3 have a 20' span and the top plate height is 10'. 1...

I am building a truss roof over a flat roof.the size is 9'wx9'd.where do I begin this [ 2 Answers ]

I am building a gable roof over a flat roof at our church.It is 9'wx9'l.How do I determine the height of the center rafter?

Roof truss [ 1 Answers ]

I am building a gambrel storage sheld 12x16 sheld I need to know how wide of a truss will I need, and how can I build my own, what kind of a angle do I need to cut for the peck of the truss, what degree does it have to be and how much of a hangover, do I need a hangover? give me some info...

Understanding roof truss diagrams. [ 17 Answers ]

Hello - I am in the process of investigating expanding a room by taking some space out of my garage. This entails moving a wall about 2.5 feet into the garage to gain this space in a mud/laundry room. Above the room is attic space (which is easily accessable). My concern is that the current...

View more questions Search