 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tempstarmodel#ntc6075fba1gas furnace runs but won't satisfy desired temp at thermostat
Runs for only minutes at a time and will not satisfy the desired temp that the thermostat is set at. Burners shut down, seems like gas valve is closing. Not sure if it's a limit or not.
|
||||
Check out some similar questions!
My noma thermostat is programed to stay at around 18 and it is up to 23 and keeps getting hotter in the house and I can't figure out how to make it stop at the desired temp.
I have a Bryant plus 90 furnace. Approx 8 years old. It will run for about 5 minutes then stop before reaching desired temp. Then it will try to start up again but shut down before ignition. Flipping power on and off will make it work again. I cleaned the flame sensor with no change. It appeard to...
I have a older Goodman furnace that fires up and raise my temp by a degree or two an then cuts out and goes to re-ignite but will not until you turn the power off and then back on and the cycle repeats itself. I have taken out the flame seņor and cleaned it and installed a new thermostat but...
My beckett 55,000 btuh model afg runs but shuts down before desired heated temp.the computer panel was changed for 160.00.that did not fix the problem.it struggles to get warm in house
I have an electric furnace that is approx. 15 years old. It will work fine, until about 2:00am, then it will not kick off. I have checked the thermostat, & it is kicking back like it is supposed to, but the furnace continues to run. I had this problem, very sporadic last year. Now it is happening...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
