 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan Control Switch.. To: hvac1000
I have a 1950's furnace (believed to be circa 1954 , unknown manufacturer)with a "Penn Type 520 - Model 1000 Combination Furnace Fan & Limit Control".The fan motor runs continually . After checking all of the connections(for rodent destruction),I believe the fan control switch has gone bad. My question is: Can I retro-fit a newer switch to the chassis of the control or will I have to replace the complete assembly?
|
||||
Check out some similar questions!
Pull the power from an outdoor GFI... can anyone help me on how to make the connections?
The chain on the fan broke and had to replace the 3 switch control. I didn't notice what order the cables were in before taking the cables out. I have a L, 1, 2, & 3 on the switch control with Black and 3 other colors. Black seems the be load and I have inserted in L. When operating the fan,...
I have a Moss Hi Line model HFL ceiling fan. It was purchased 1983. The pull switch went bad and someone else disassembled it leaving no diagrams. It has a 3 speed two layer pull switch and a 5 wire capacitor. The capacitor is Shizuki.d306 with markings 1.25 - 4.75 - 4.75 - 8.00. Does anyone have...
We removed a builders ceiling fan with no light from our home. We re trying to upgrade to a Hunter Ceiling Fan with a light kit. There is a one way dimmer switch that worked the other fan. The old swich works the new Hunter fan but there is an apparent humming sound now. We baought a new dimmer...
I am trying to install a Harbor Breeze control switch in the wall. My wiring is one black and one white wire. The switch has two black wires and the uusual reen ground. How do I wire. I am new to the site and appreciate any help. Thanks, Th0623
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
