Ask Experts Questions for FREE Help !
Ask
    a617431158's Avatar
    a617431158 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2010, 05:09 PM
    Cam pulley pin sheered off on my 1993 honda
    My 1993 honda accord sheered the cam pulley off and so I had the head replaced and it ran for a few minutes then it did it again the mechanic is at a total loss as to why it happened and sugggested we should just replace the motor what would cause the motor to do that
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 31, 2010, 07:47 PM

    Something seized (e.g. water pump bearing)--the camshaft pulley key was the weak link and gave way. I would figure out what seized and fix it. I would only replace the whole engine as a last resort. Consider towing the car to Honda for repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

94 honda civic pulley bolt is welded now pulley is knocking against timing cover [ 1 Answers ]

What do I do? Its wobbly and I can't remove the bolt because it has been spot welded I need my car I'm a singly mom w/disabled child

Can a 1993 honda integra 1.8 motor and 5 speed trans go in a 1994 honda prelude [ 0 Answers ]

Can a 1993 honda integra 1.8 motor and 5 speed transmission go in a 1994 honda prelude with a 2.0 and automatic transmission

Pulley (1990 Honda civic LX) what size bolt for it [ 1 Answers ]

I bought a pulley for a 1990 Honda Civic Lx but I need the bolt to go with it. What size bolt do I buy?

View more questions Search