Ask Experts Questions for FREE Help !
Ask
    Gileczm1's Avatar
    Gileczm1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2010, 05:44 PM
    Lennox standing pilot valve
    I have an old Lennox space heater in my warehouse. The standing pilot valve has malfuctioned and would like to repair it. I believe the part number is V5114-100 or 15AGAC1. I am having difficulty find a replacement part. What are my repair options?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 31, 2010, 10:31 AM
    Depending how old it is you might be able to use a generic replacement valve. Older units are not that specific. You might be able to go to a local HVAC company and sort through their discards, I've picked up a few older units that way and was able to retro fit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Gas Fur smart valve sv9541 cycles, clicks valve, lights pilot on off.Flame? [ 1 Answers ]

I have a Heil Natural Gas Furnace with smart valve sv9541 that goes off and the valve click as the ignitor glows on and off while lighting the pilot light which then goes out, and back lit?Is this a flame sensor problem? Thanks for advice.

RHEEM furnace standing pilot system [ 0 Answers ]

HI, I have a Rheem furnace that when it ignites the blower motor starts immediately, there is no delay allowing the heat exchanger to heat up before it kicks on. I've also noticed that the pilot goes out periodically, I believe the blower motor is pushing so much air that it blows it out. I've...

Standing pilot [ 1 Answers ]

I have a problem with my pilot to stay on.I cleaned the orfice and installed new thermocouple.and still don't stay on.it a comort aire furnace.just wondering if the gas valve needs to be replaced.thank for Comments.

Pilot Relight module for old lennox furnace [ 3 Answers ]

Hi Everybody, Am planning to install a pilot relight module on my old Lennox model furnace with no motherboard . What kind of module Do I need to go through this process without having a motherboard . I have seens kind of a metal T stat located very close by the ignition module box which I...

Old lennox with standing pilot and cam stat cycling [ 8 Answers ]

Hi gents Old lennox model 9803-980-2 H.boy 68000 BTU with a honeywell fan limit cycling every 5minutes . The wires disconnected at the Stat and jumpered . Still the furnace acting same problem . The motor and blower wheel and pilot acting quite normal . Do you think the fan limit is faulty...

View more questions Search