 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace will not automatically start
I have an oil fired furnace with a Beckett AFG Burner and a Honeywell R8184 box on the burner unit. The red light is on and the furnace will only come on if I shut off the power wait 30 Seconds and then turn the power on and hit the reset. Once the furnace cycles it needs to be started again this way
|
||||
Check out some similar questions!
Occasionally, my blower moter on my furnace does not start automatically. If I turn it on manually, run furnace for a few minutes,and switch back to AUTO, the blower will work fine for a few days. Then it starts acting up again. Is it my manual/auto switch for the blower moter?
In the past, when I inserted a CD or DVD into the drive, I was always asked what I wanted to do, such as play DVD with Windows Media, Save to a Folder, and other options. These options always came up on my desktop in a box. For some reason, I no longer get this option. I liked that feature and...
We have a Carrier furnace that is 5 years old, the thermostat is set for 23 degrees, and the temperature is sitting at 19 degrees. The furnace quite often will not kick in, if I open the door of the furnace and manually hold the switch it sometimes kicks in with the first try; however I normally...
Sometimes when I have the furnace set on automatic it will not turn on when the temperature goes below the set point. All I have to do in order for it to work again is turn the furnace off then back on (I do this at the thermostat) and it will work fine for a day or two, then the same thing happens...
I have an Intertherm #FEH-015HA furnace in my mobile home. The furnace seems to be producing ample amount of heat but when it reaches the desired temperature, it does not shut off. I thought it was a thermostat problem so I replaced that but it still does not shut off. The only way I can get it to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
