Ask Experts Questions for FREE Help !
Ask
    foghead's Avatar
    foghead Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2010, 07:07 PM
    Eb10b furnace
    The problem I have is that the furnace runs fine during the day kicks off and on keeps house warm. (Mobile Home) Then sometimes in the evening the thermostat shows system on but furnace not running, and like this morning I woke up and the thermostat was set @70 and house was 60. What I have to do to get it to start back up is I switch the fan from auto to on and the fan runs I turn it back to auto (sometimes have to do it more than once) and the heater starts and then runs again good for the rest of the day

Check out some similar questions!

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.