 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Inducer motor rattles on bryant
I have a Bryant BVR24 and I got a Error Code 31. The inducer motor is rattling and turning very slowly when the thermostat is turned on. This is causing the heater not to turn on. What could be causing this. It is something that just started and we have had the heater for 12 years.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a byrant furnace model 395b - the inducer motor fan squeals and I was wondering if it should be repalced or can I oil it and how? The furnace company wants $100 to look at it and I was wondering if I could do it myself!
I have a Bryant Plus 90 high efficiency furnace, Model 398A, about 14 years old. I am now on my third inducer motor assembly. The plastic blowers on the first two disintergrated. Does anyone have any idea as to why and what can be done to prevent another failure? Besides the inconvenience of no...
I trigger the furnace using the TEST lead to the common lead. The inducer motor starts (somewhat slowly), the ignitor glows, missing gas flow rom the GSV and then the blower tuns on and then shuts off. No fault code. I replaced the gas valve, no change. I checked the pressure switch for the draft...
Bryant plus 90 furnace, inducer motor temp reaches over 160 degrees and has a burning smell. Tech was out last night and said it was a bad heat relay on the circuit board and needs to replace it. He bypassed the relay and said it was OK to run. I will only run the main blower in the ON position and...
I have a 13 year old Bryant 350MAV gas furnace. The 2 halfs of the inducer housing are leaking water. Can these 2 half be pulled apart and resealed? If so what special type of silicone needs to be used if any?
View more questions Search
|
