Ask Experts Questions for FREE Help !
Ask
    tabend's Avatar
    tabend Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 27, 2010, 12:59 PM
    Change look of corian counter top
    I have a 7 ft long corian island (a boring color) is there some way to update the island without replacing it? Is it possible to add an edge of different color or anything?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Dec 27, 2010, 08:12 PM

    If the edging on counter top is square cut a wooden trim could be added.

    If edge is shaped like molding, it would have to be cut off square.

    To add a different color corian edge, would advise getting corian company to do the work.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cutting corian counter top [ 6 Answers ]

What tools and what method can I use to enlarge a corian counter top cut out for a cooktop. I need to enlage the cutout by about 5/16 in in one dimension and 3/16 inch the other. The couter top is about 1 inch thick.

Can I fix my broken corian counter top [ 2 Answers ]

I remove corian counter top with some friends and I broke it in 2 pieces right by the sink.. is anyway that I can fix that myself and how.. or I am going have to get professional to do it and if anyone know--how much it is going cost---average... crack about six inch away from the sink... all the...

Corian counter top repair [ 3 Answers ]

My corian counter top was damaged by heat. The spot is approx. 2 x 3 x 1/64 inches. How can I repair it without making an obvious spat? Thank you for advice.

Corian Counter top installation [ 2 Answers ]

I was given 2 sheets of corian counter top from a builder friend of mine, how do I install and what do I use to cut it?

Corian Counter [ 2 Answers ]

What tool would you use to cut Corian? I have a piece from an old kitchen counter that I want to cut into a 20"x20" cutting board. It is about 3/4" thick and the longest cut I have to make is about 24". Thanks


View more questions Search