 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane gas furnace stops sometimes
Dear help,
My Trane gas furnace stops working some time to time and after play with the control in the room (manual) it works again. This happened a few times and I wonder if I need to replace the control in the room since it is relatively old. Thanks. Ellen |
||||
Check out some similar questions!
The gas fires for a few seconds and then shuts off and restarts the cycle again. Usually it works the second time. Sometimes it locks out and has to be reset. I've cleaned/replaced the flame sensor. I checked the vacuum switch -ok
I have a Duo Therm 40,000 BTU gas furnace, I live in a fifth wheel RV. My furnace will turn on and heat for acout 12 minutes and then I hear a loud popping sound and the flame stops. So, I shut it off and back on and it will heat again for just a few minutes until the gas stops getting to it. Is it...
I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(
Hi, I got a problem with main blower in gas furnace. I've checked this site, but didn't find an answer. Symptoms: Sometimes it starts and stops when burns work or don't start at all. Relay clicks to start blower in 30 seconds after burner started, but blower doesn't start or stops and then...
Hello I have a Gaffers-Sattler furnace, about 40 years old. Runs great, but for one problem. In the morning around 5 or 6, I turn on furnace and it will heat up and run for about 5 to 6 minutes then stop for about 3 minutes and repeat this all morning long. (frustration as this is when its...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
