What does it mean when the electric starter doesn't work on a craftsmen snow blower?

zorro1346 Posts: 6, Reputation: 1

New Member

Dec 27, 2010, 03:58 PM

What does it mean when the electric starter doesn't work on a craftsmen snow blower?

DG Posts: 1,375, Reputation: 109

Ultra Member

Dec 27, 2010, 04:05 PM

The starter gear could be stuck in the engage position , if it has a pull on it you might try pulling it a couple of times this could release it

Add your answer here.

Check out some similar questions!

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Like an electric shock below my armpit. I do work out and had shovled a lot of snow. [ 3 Answers ]

I work out with weights and do cardio a lot. I have noticed when I run or jump I get like a bee stinging feeling below my arm pit almost where my lat muscle ties in. It does not bother me only when jumping running, if I hold the fat or my chest when running it does not bother me either. I hope...

Pull starter on an old snow blower jams when pulled, anything I can do? [ 1 Answers ]

When I pull the rip cord on my snowblower it feels like it will turn over once and then jam up. I lubed it all up and it still won't budge, any suggestions?

Frozen snow blower starter [ 2 Answers ]

I bought a sears 5.5 hp snowblower recently. I think the starter froze up because the power cord doesn't pull. After reading the manual, I was suppose to while the engine was running pull the cord 4-5 times before shutting it off to prevent this from happening. How do I unfreeze a snow blower...