Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
York Diamond 80 heat blower cycles 20 seconds
[ 9 Answers ]
Hi, I have a 1996 York Diamond 80 furnace. Everything starts up OK (thermostat fine, flue fan kicks on fine, then pilot orange glow, then click, then gas burners fire up, then main blower fan starts). This all happens in about a minute or so, but then the main fan only runs for 22 seconds, then it...
York stellar high efficiency gas-fired furnace
[ 3 Answers ]
We installed this used furnace but can't seem to find were to hook up a 2-wire thermostat
Luxaire High Eficiency Gas furnace Pilot goes off
[ 8 Answers ]
Hello Experts, I am a new member of this group from New Jersey. I have a Luxaire Gas Furnace about 12 years old. Today all of sudden cold air was coming through the ducts. Blower was on but no flame I saw then turned off the blower and turned on again Pilot came on so did the...
York Stellar LP furnace cycles quickly
[ 1 Answers ]
After exhaust fan operates for 20 sec, ignitor glows for 15-20 sec, then gas comes on for 1 sec. then goes out instantly, ignitor stays on and gas ignites in another 20 sec. This cycle continues without interruption. Consequently, heat never comes on.
York Stellar Gas Furnace cycles quickly
[ 4 Answers ]
Our LP gas furnace seems to be cycling rather quickly. The exhaust blower will come on for a few seconds, then the burner ignites properly. When the main blower fan kicks in the burner shuts off immediately. The blower continues to run for 30 sec. then stops. The exhaust blower continues for 45... View more questions Search
|