Ask Experts Questions for FREE Help !
Ask
    bobhill's Avatar
    bobhill Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 24, 2010, 12:45 PM
    I have an older blower motor. Not sure of the brand... Need to know how to wire it
    Wires are red, black, yellow, green, and two brown for capacitor. Wires are faded, green may have been blue?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Dec 24, 2010, 01:48 PM

    Look on the motor. It should have a nameplate on it. We would need the information from that to help you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Older clare furnace with loud blower motor [ 8 Answers ]

I have a clare furnace model # HEM8 90-8 direct vent. The blower motor started making a lot of noise so I removed it and checked it out. There is a fan blade inside and it broke free from the piece that slips over the shaft. I tried to get it to stay which it did for a bit and it started...

I have a new blower motor with a extra wire,what do I do with this wire.Going from 3 [ 1 Answers ]

I bought a new blower motor for my furnace,The old blower motor was a 3 speed and new motor is a 4 speed.The place I bought it told me to hook up white on white,black on black,red on red.And leave the orange wire hanging.I have no high speed for the ac.Is there some where I need to install the...

How to wire heater blower motor [ 2 Answers ]

I am rewiring a Rudd Heater Blower motor. 240v 3 speed motor and I am trying to wire it. It doesn't matter how I wire it, as soon as I hit the 240v breaker by the unit the motor runs. I have even disconnected the thermostat totally and the motor runs constant. I am not an electrician.(Obviously)...

New blower motor has no white wire [ 3 Answers ]

I installed a new blower motor and the new blower did not have a white wire. Now the blower want work at all. How can I get this to work?

View more questions Search