Check out some similar questions!
Changing head gasket on a honda ht3813 water cooled engine .
[ 0 Answers ]
Any help would be greatly appreciated! Thanks Fred
Water cooled Trane Heat Pump
[ 1 Answers ]
I'm working on a heat pump that is water cooled, and the problem I am having is the person before I worked on it put in a new compressor that is having pressure problems. My boss says I should charge the unit up in the heat mode since it is winter, and check for at least 50psi on the low side, and...
Water cooled res. A/C highpresure 400PSI is this OK
[ 1 Answers ]
My 2t Water Cooled Unit Reads 385psi-hi And 80 Psi-lo. The Return Air Is 78 And Blows Out 62 +-. Is This Ok? The Evaperator Is All Cool And Sweating And The Cool Pipe From The Evap. To The Rev. Valve Is Cool. ( Not Sweating) The Two Other Lines 1/2 And 1/4"to And From The Water Loop And The...
Sandy material in water cooled A/C
[ 1 Answers ]
I live in a condo where we have water cooled 3 ton heat pumps for each unit. We have a large cooling tower on the roof. Our building is 25 years old and about a quarter mile from the beach in Florida. My A/C shut down yesterday and when I restarted it it did the same after a few minutes. I... View more questions Search
Add your answer here.
|