Ask Experts Questions for FREE Help !
Ask
    mloser's Avatar
    mloser Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 21, 2010, 09:39 AM
    Replacing a 4 wire with a 5 wire fan pull switch??
    I have an old fan with a 4 wire switch... Well Tec E116997... with a black, pink, yellow and gray wire. I want to replace it with a E70469 switch with TWO black, a gray, a purple and a brown wire.

    Any suggestions?

Check out some similar questions!

3 speed, 4 wire ceiling fan pull chain switch replacement [ 20 Answers ]

I recently changed the 3 speed 4 wire switch on a ceiling fan as the old one had a broken collar. I purchased a replacement at Lowe's. The replacement worked at high speed only. I was careful in noting which color wires went into slots 1,2, 3 & L. Thinking that the new switch was defective, I...

Replacing a 5-wire ceiling fan switch [ 1 Answers ]

The fan is about 25 yrs old. No manufacturer available. The 5-8 wire sw broke at the neck. Someone else removed the switch WITHOUT recording where the wires went into which slots. The old switch is a double-decker. The wire colors are: Black (2), Yellow (2), Orange (1) & Violet (1). The...

Replacing 8-wire ceiling fan switch [ 1 Answers ]

I am replacing an 8-wire Westinghouse 3-speed fan switch in a ceiling fan. The tags originally placed on the wires, from the mounted fan unit, have come off and I am left with guessing which wires go where. As memory serves me, there is are two black leads, one or two blue leads, and I believe a...

Need help replacing a 5-8 wire ceiling fan switch. [ 1 Answers ]

I am trying to replace a 3 speed, 5-8 wire fan switch with a Harbor Breeze switch. The old switch has numbers 1-Blue wire, 2-Red wire, 3-Orange wire, 4-? and C-Black wire. I don't know which wire was in 4 as it fell out. The old switch is single layered with connection holes and the black wire...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.