Ask Experts Questions for FREE Help !
Ask
    Kelko15's Avatar
    Kelko15 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2010, 10:51 AM
    I am looking for a honeywell control valve model # u501a 7055 can any one help me?
    Dennis1523's Avatar
    Dennis1523 Posts: 54, Reputation: 2
    Junior Member
    		  
    #2

    Dec 18, 2010, 03:21 PM
    Get the unit model serial number inside the panel and or all the info off the gas valve itself. Then Google it and look for the one that matches yours.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Dec 18, 2010, 06:47 PM
    Not for sure if that's a good part number. What's it going on? Honeywell makes a lot of controls and I bet they have the universal control to fit in its place.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Evaporative Emission Control System Purge Control Valve Circuit Shorted [ 5 Answers ]

Evaporative Emission Control System Purge Control Valve Circuit Shorted what are possible cause codes are p0601 and p0445

Evaporative Emission Control System Purge Control Valve circuit Malfunction [ 3 Answers ]

p0443 Evaporative Emission Control System Purge Control Valve circuit Malfunction on mazda melinia s 1996 83k?what is the next stip? I cleared the check engine light and it went off ,and after 60miles driving it cames back again?why and how can I fix it ? Also what is the cheapest way to reset...

Where to find the model number on my Honeywell Synchron zone valve [ 5 Answers ]

Where to find the model number on my Honeywell Synchron zone valve. I think the Powerhead and/or motor has gone bad. I had no heat in my master BR this morning and after verifying the Thermastat was kicking in I went down and tried to check the valves. This is just 1 zone out of 5 (3 other...

Using johnson control on honeywell gas valve [ 1 Answers ]

I have a new honeywell gas valve for my furnace M# VR8345M 4302. I am trying to use a Johnson Ignition Control G770 MGC-3 to operate This valve. The problem is I want to use the intermittent function of this honeywell valve And the johnson igniter control has no provision for the mv/pv on the...

View more questions Search