Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to install a rheostat on Intertherm furnace in mobile home
[ 0 Answers ]
The fan motor is very noisy even when set on slowest speed. Told a rheostat could be added to reduce speed further and thus quieten output which sounds like an aircraft taking off.
Intertherm mobile home furnace, HSI, with no remote sensor
[ 3 Answers ]
HSI system with no remote sensor, can I replace a silicon carbide ignitor with a nitride ignitor and safely prove ignition, note.. the ignitor pulls double duty, ignites and proves..
Hrv intertherm gas furnace,mobile homes
[ 3 Answers ]
Does the above mentioned furnace come with a built in hrv?
Coleman Mobile Home LP Gas Furnace
[ 9 Answers ]
I have a Coleman 7900 Series LP gas furnace in a 1988 mobile home that is used as a weekend cottage. During the winter, the furnace works fine when we are in the home and the thermostat is set to 68. When we leave, the thermostast is lowered to 45. When we return 1 to 2 weeks later, the furnace is...
1956 coleman gas furnace mobile home
[ 2 Answers ]
Does any on e have a diagram the I could find some where or get free tro wire up this furnace correctly some one before just rogged it up and it does noe shuy down once heat get to temperature. I have looked all over to tryt oget this hooked up right and I sure would appretiate your knowledge and... View more questions Search
|