Replacing lennox t-90 thermostat with honeywell RTH111B1001/u matching wires

soanxious77 Posts: 1, Reputation: 1

New Member

Dec 17, 2010, 04:27 AM

Replacing lennox t-90 thermostat with honeywell RTH111B1001/u matching wires

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Dec 17, 2010, 08:18 AM

More info needed,, what is the question?

Add your answer here.

Check out some similar questions!

Replacing Lennox Thermostat with Honeywell Thermostat [ 2 Answers ]

I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to install a Honeywell RTH6300B Thermostat. According to the RTH6300B Installation guide, it tells me to ignore wire...

Replacing Lennox 51h4301 with a Honeywell RTH7600 [ 3 Answers ]

Looking for the wiring match-up to replace my existing thermostat 51H4301 to a Honeywell RTH7600 unit. My outside unit HP21-511-4P and the inside unit is CB19-51-3P-TXV. The current wiring for the thermostat is: O G C R T W1 - two tied together on one screw Y1

Replacing lennox thermostat w honeywell - wiring question [ 3 Answers ]

I have an old mechanical (mercury switch) lennox thermostat driving a heat pump - I am trying to replace with a Honeywell RTH7500D. The wiring is confusing as the Lennox matches nothing in the manual. I found a matrix on here that seemed to explain the Lennox thermostat quite well and when I...

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Matching wires on new honeywell thermostat [ 1 Answers ]

My old thermostat was janitrol HPT 18-60 and wires were: Y (yellow) G (orange) R (Red) O (orange) W2 (white) E (Black) C (Blue) I just bought a Honeywell #RTH6300B. Their wires are: G,W,Y, R,RC. How can I match them up? Do I need the "O" on the old one? We are only getting hot air now by...