Ask Experts Questions for FREE Help !
Ask
    robh184u2nv's Avatar
    robh184u2nv Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2010, 07:56 PM
    How to wire a ct meter pan
    I want to know which side of a ct is the line and which side is the load on a 400 amp meter pan
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Dec 16, 2010, 08:44 PM

    Ask your foreman, supervisor or boss.
    This is not something you should even be touching if you don't know what you are doing.
    This is also way beyond anything DIY.

    Doesn't your power company have rules regarding who works on things like this?
    Things like diagrams for meter pans and CT cabinets are typically in the utility's rule book.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Type of wire needed for electric meter [ 3 Answers ]

I have a 100 amp main breaker in my service panel. (not a sub panel). I'm changing the service panel to a newer 100amp panel. So I would like to change the wires coming from the meter outside to the service panel. The current wire is not in any type of pipe. It's three wires wrapped in a weather...

Wire size for new electrical meter [ 3 Answers ]

I'm moving my electrical meter due to our new kitchen addition. The new meter will feed two 200 amp panels. The first panel will be approximately 130' away and the second will be 230' away. What type of wire should I use for these runs?

Ground wire to Gas Meter/Line? [ 3 Answers ]

I live in Pasadena, California. We are installing a 200 amp Electrical Panel between a friend and I, he has more knowledge of electrical wiring than I do but he told me that we were going to install two copper grounding rods six feet apart near the box and run a line to the water main and another...

Wire from manufactured home to meter base [ 1 Answers ]

What size wire do you use from the breaker box in manufactured home to the meter base. I was told there were 4 wires involved - I understand the 4th wire is a ground, but where does connect in breaker box and to the meter base?

View more questions Search