Ask Experts Questions for FREE Help !
Ask
    beaversfg2's Avatar
    beaversfg2 Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 16, 2010, 04:28 PM
    t852a wiring
    I have an old thermostat model t852a from honeywell it has four wires can someone help identify these wires to use on my new thermostat
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Dec 16, 2010, 07:30 PM
    Give us the color of wires that hook to what letter on the thermostat. We will see if we can walk you through it.
    mgliue's Avatar
    mgliue Posts: 29, Reputation: 1
    New Member
     
    #3

    Dec 16, 2010, 08:33 PM
    Yellow to Y, green to G, white to W and red to R. Easy pal
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #4

    Dec 16, 2010, 11:55 PM
    (quote) yellow to Y, green to G, white to W and red to R. Easy pal


    This is correct if, whoever wired it did it correct according to rule of thumb,, but not always the case
    Give the answer t-top asked for,, or go to the furnace and write down what each color of wire is connected to what


    beaversfg2's Avatar
    beaversfg2 Posts: 2, Reputation: 1
    New Member
     
    #5

    Dec 17, 2010, 06:31 AM
    I have a blue wire, orange wire, blue and white wire, and a orange and whit wire. None of the wires are labeled and nor does the thermostat have any labeling to where the wires connect.
    mgliue's Avatar
    mgliue Posts: 29, Reputation: 1
    New Member
     
    #6

    Dec 17, 2010, 04:40 PM
    Open de furnace door, take a look to the connections to the electronic board. I suppose that your new th, is labeled. So if example if your orange in the board is connected to W is going to be connected to W in the th. And the same for the others. Good luck!!
    mgliue's Avatar
    mgliue Posts: 29, Reputation: 1
    New Member
     
    #7

    Dec 17, 2010, 04:43 PM
    Very important: Shut off the main switch of your furnace before opening your door.!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the wiring diagram for a 40" 12 horse, wiring for solonid&starter [ 3 Answers ]

I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter

Honeywell wiring need to connect to a lux tx9000ts wiring [ 5 Answers ]

I am replacing a honeywell non-programmable with a Lux TX9000TS. The old wiring inputs show e, aux, y, g, o, l, r, b, c (with is optional with batteries) and the new lux is w,y,g,b,o,rc,rh,c. Which wires go were?

Hunter fan wiring model 26107 light fixture wiring sequence [ 2 Answers ]

There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...


View more questions Search