Ask Experts Questions for FREE Help !
Ask
    queen1961's Avatar
    queen1961 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2010, 01:19 PM
    Remove tub and make into shower
    Wondering about how expensice it would be to remove shower doors and tub and make into a shower area only. Bought an older home from 1958. Add on bed and bath was in 1997 but I'd like just a shower are with no tub.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 15, 2010, 03:02 PM
    Hard to come up with a cost which varies by location, extensiveness of remodel, price of shower, 1 piece, 3 piece, tiled? At a minimum you will need to remove the walls, tub, probably relocate some or all of the water supply and drains, build a new floor, etc. Not cheap. Why not remove the door, put in a bow type shower curtain, some new faucets with a fancy rain type showerhead and just use it as a shower? Lot cheaper
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Dec 16, 2010, 07:39 AM

    I have something that may save you a lot of extra labor.Sweanstone makes a 60" retrofit shower base, (see image) That drops right into the space left by your tub. Check them out at;
    Retrofit Shower Floor - Home & Garden - Compare Prices, Reviews and Buy at NexTag - Price - Review
    Good luck, Tom
    Attached Images
     
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Dec 16, 2010, 08:11 AM

    I have done several Swanstone retrofits. They are made for exactly your situation. The mixing valve needs to be replaced if you want this to look right but frequently the drain is in the right spot and lakes things easy.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #5

    Dec 16, 2010, 10:44 AM
    Comment on speedball1's post
    Isn't that slick! Learn something new every day! Brian
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a fiberglass tub and shower assembly? [ 8 Answers ]

I want to replace a fiberglass tub and shower in an apartment. The bub has cracked and been repaires several times.

Tub to tub/shower conversion: Need to re-route water lines for a shower faucet? [ 12 Answers ]

Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...

Remove a shower tub [ 1 Answers ]

How do I remove a shower tub from a small bathroom

Cannot remove Moen tub shower diverter [ 1 Answers ]

I have a 3-handle moen tub/shower faucet. The center handle(diverter) froze up and will not turn. I ordered a replacement(part #94543) thinking it would give a clue as to how to remove the old one. I guess its corroded in place around the brass area of the cartridge. Any tips on removing the...

Remove fiberglass tub and shower [ 1 Answers ]

We want to remove the old fiberglass shower and tub unit. We will rent a Sawsall--but Where to start sawing and with which blade? How to make fewest number of cuts and Keep fibers to a minimum? Experience from others on using the right equipment, clothing, protective equipment? Thank you,...

View more questions Search