 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi, I have a Concord 90 upflow gas furnace that is about 5 years old. It just decided over the weekend to stop working (after a couple of weeks of being turned on), right in the coldest of winter (-20 to -25C). The cycle goes well just until the flames come on. Thereafter, it lasts only for...
I just had my furnace replaced last winter with a brand new carrier Gas Furnace/AC unit. It worked fine all last heating season, now when I turn on the heat, it won't fire. The central air unit also didn't work this cooling season. The fan won't even come on when I switch it to on at the...
I noticed two days ago that my furnace was running but the house seemed to be getting cold. I checked the thermostat and sure enough it was 60 degrees, when it was set to be at 71. I turned the furnace off, turned the gas off, and then relit it and it turned back on. Worked fine for awhile and then...
Can use any help... Have an older Carrier Gas Furnace that has gone on the blink. The hall thermostat just stopped working, but only on the HEAT side. (Run the AC just fine.) Was told it was the "thermocupler", so we replaced that, but nothing happened. What else could be wrong? Or should I...
I have a Goodman Model # EG030075-1AB REVC Gas Heater it has been converted to run on LP Gas. Furnace has worked fine for years. Turned the heat on and nothing happens. The LED on the control board is not lit. I checked the voltage at the control board and all the voltages appear to be normal. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
