 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I'm not getting flame at the 3rd burner orifice is clean. What could be wrong? Thanks
Flow to the gas valve is 6.7wc. This is a freedom 80 two stage furnace. Could it be I'm not getting enough pressure to the manifold for the third burner to light? Is there a way to increase the pressure at the valve? If yes could you please explain the adjustment I need to make? If gas pressure isn't the problem. What else could it be? Thank you!
|
||||
Check out some similar questions!
This season is the first time ever that this has happened. The furnace starts, gets a flame, runs for a while, then it flames-out. It sounds like the oil pump is still running (I hear like a spraying sound). Nothing shuts off. Then the flame will come on again, but may continue flaming-out...
I have e 2 thermostats... 1) AS read on front.ATWOOD OPEN FLAME BURNER... 2) Coleman... I have a Coleman furnace... what is the purpose of the ATWOOD?? I live in a park model modular... thanks.
I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...
What's the proper color of flame supposed to be comiing out of the burner assembly. My color is yellowish orange.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
