Ask Experts Questions for FREE Help !
Ask
    KyleWrightsel's Avatar
    KyleWrightsel Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 14, 2010, 05:45 PM
    94 chev 1500 4.3 v6 won't start
    I have 94 chev truck 1500 with the 4.3 v6 4 wheel. THIS truck won't start , and I drive it home. Its got spark, I check the timing, its good, its got new spark plug wires and spark plugs, new destubutor and cap, change the map sentor, and its got a new gas pump. Still not start up.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Dec 14, 2010, 07:39 PM

    Make sure you replace the Ignition Control Module (ICM), if it has not been replaced in the last 120,000 miles. This link may help:

    https://www.askmehelpdesk.com/cars-t...ml#post2123675
    KyleWrightsel's Avatar
    KyleWrightsel Posts: 3, Reputation: 1
    New Member
     
    #3

    Dec 14, 2010, 08:06 PM
    Comment on TxGreaseMonkey's post
    I've done replace the ICM too.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #4

    Dec 15, 2010, 07:40 AM

    Have you checked for injector pulse?
    Does the check engine light come on? Do you have a way to check for diagnostic trouble codes?
    Why did you replace the sensor and pump?
    KyleWrightsel's Avatar
    KyleWrightsel Posts: 3, Reputation: 1
    New Member
     
    #5

    Dec 15, 2010, 12:07 PM
    Comment on CaptainRich's post
    I even check compresion on every spark plug and everything good, I check the sensor and pump to try everything and no check engine light come on. I thing the computer, but I don't know
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #6

    Dec 16, 2010, 04:55 AM

    Does the check engine light come on with the key on engine off?
    Those ECMs are original OBDI and are plentiful in the used and aftermarket. It's a simple swap if you know what you're doing and since you've tried nearly everything else, why not try an ECM.
    Still, it would be nice to have a scan tool to check some data.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

99 chev 1500, you turn the key , and nothing happens.. Radio lights everything comes on. [ 1 Answers ]

99 chev 1500, u turn the key , and nothing happens.. radio lights everything comes on. So I get down and cross the 2 wires on starter, and it fires but don't crank. I get back up check fuses with light tester everything looks good. I try one more time turning over and it tries to start but nothing...

1998 chev p/u won't start [ 1 Answers ]

Hello, I have a 1998 chevrolet p/u, silverado 1500, 1/2 ton, 2wd, 8 cy, 5.0 engine. It was working fine, I parked and when I tryied to start it again it went "click" but did not start anymore. The battery is fully charged, and there is also 12v at the starter wire. I was told by AAA the problem...

1990 Chev 1500 Fuel Issues [ 1 Answers ]

Hello! I have obtained a 1990 Chevrolet 1500 pickup in the beginning of July '08. Everything has been working on it, till now. Just recently (Saturday) I've started to notice problems, the truck will start fine, and idle fine. Once you start moving, and it warms up the "Check Engine Soon"...

91 Chev truck 1500 [ 1 Answers ]

I have replace the ac compress 2 times. The first time the ac clutch was kicking on and off. Replace the compress and clutch and its doing the samething again. The clutch is kicking on and off. When you crank the truck its fine when you speed up the engine the clutch starts clinking.

1980 chev g20 van won't start [ 1 Answers ]

I have replaced the battery, cleaned the cables and posts so they shine. The van will start when I use my charger , but when I turn it off will not start again. Could anyone offer an answer to whar my problem may be as it runs very well when running


View more questions Search