Ask Experts Questions for FREE Help !
Ask
    wakemasterx's Avatar
    wakemasterx Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2010, 05:47 PM
    What does the ind dft tab mean on a gupi100-4 control board
    I replaced the control board on my GUPI 100-4 Janitrol unit and the ignitor lights but it will not start the furnace. I noticed that the IND DFT tab on the old unit is broken off, is this my problem? Don't want to break it off the new board if not nec. By the way, it worked fine before the switch and Ive checked all the wiring about 10 times

Check out some similar questions!

Microsoft excel 2007 Linked tab. Does it open a hidden tab? [ 0 Answers ]

With an accidental click on Firefox tab bar, the tab will get out n open another wind [ 1 Answers ]

With an accidental click on Firefox tab bar, the tab will get out n open another window; how do I pull it back the other way round? i.e. close this new window and put it back on the original location ?

Control board [ 1 Answers ]

I have a gmp 075-3 I havea control board icm 280 and b1809913.The 280 everything comes on except the blower motor.the b1809913 everything comes on except the flame and the led blinks 4 times with the other board icm 280 solid led no blower motor go figure that out and there both new.anybody got...

DFT on Concrete Surfaces [ 0 Answers ]

Is there is any other method to find out the DFT (Dry Film Thickness) of concrete surface except WFT measurement ?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.