Ask Experts Questions for FREE Help !
Ask
    JeredB's Avatar
    JeredB Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2010, 01:27 PM
    My snow blower Will not fire?
    My snow blower will not start. I took the carb off and cleaned it, changed oil, put in new plug and put in fresh gas. When cranking over (electrtic start) I can not get it to even fire. I have even tried starting fluid and it will not even pop. Any ideas?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Dec 13, 2010, 04:27 PM

    Sounds like no fire to spark plug.
    What type of key switch do you have ,what brand of blower , this info would help us help you.
    Luck
    JeredB's Avatar
    JeredB Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 14, 2010, 10:41 AM
    Comment on DG's post
    Figured it out. It was a stuck valve as the machine has not been used in a couple of years. The exhaust valve was stuck open and inturn had no compresion. Thanks for the reply though.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Dec 14, 2010, 03:35 PM

    Good Job .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Snow blower [ 1 Answers ]

How do I adjust the V belt on my kraftman snow blower model number c950-52477-5 the augers do not engage when I pull the handle

Snow blower [ 4 Answers ]

I have an older snow blower a Yardman it is about 15 years old what is the best Oil to use in it, and what spark plug would be best. Thank you

Snow blower not picking up snow [ 2 Answers ]

I have a Noma 5.0 HP snow blower that is not working correctly. The shears are not turning and picking up the snow. I've checked the shear pins, but they seem to be in good condition. What else should I check? Thanks

Snow blower [ 1 Answers ]

I got a new snow blower last year and used it once, worked great, this year it won't start. Primer is just pushing air, gas line is not bloked. I put I little gas in the spark plug cylinder and it fired up for a second. Gas is not going through the carb, is something stuck, what should I do. I did...

View more questions Search