 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Restart my igniter after turning off main furnace power
Furnace was blowing heat bt after about 3-4 cycles would shut off. Wanted to check status light and opened panel. Took off power to do so opened furnace door did not touch anything... now furnace won't come on at all... igniter is no longer glowing... should it be reset. Goodman GMP090-3a
|
||||
Check out some similar questions!
Hello, I have a carrier furnace that works well once started for anywhere from 1 day to a week at a time and then seems to fail to restart. Once the power to it is reset (flipping the breaker off and back on) it seems to start fine and keeps on going stopping at the temp that is set and then...
Burnham Series 2 Gas Boiler is not receiving elec power , but main line has power up to the unit
My furnace is not lighting (I believe it is a Day and Night). When I turn up the thermostat, the venting fan motor comes on as usual.. followed shortly by the igniter (I can hear the "snap snap.." of the igniter), but after that, burner never comes on, so the blower never comes on etc. It has...
Hi There, I have a gmp 1 00-4 Gas furnace. I guess it is more than 10 years old since the house is built in 1995. The furnace was working fine last year, but this year, it stopped working. I have searched the internet and followed some of the instructions and here are the status: Call for...
Carrier gas furnace will try to start, but igniter does not light furnace. Red light in window flashes -is thiis the "code" for the numeric list on the attached plate?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
