Ask Experts Questions for FREE Help !
Ask
    vincent2668's Avatar
    vincent2668 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2010, 09:30 AM
    Furnace runs for about 30 min, then shuts off before hitting set temp
    I have a Goodman 060-3 furnace. All works fine until it gets down in the single dig temps outside. Furnace will run for about 30 min then shut off. If I recycle power at the furnace or at the thermostat it will come back on again. There is no flashing light code while furnace is running. (Solid RED). All works and cycles fine when temps are a bit warmer. Is there a timer that timer that keeps the furnce from coming back on for awhile after it has run for 30 min or so?

Check out some similar questions!

Coleman evcon presidential furnace. Runs, doesn't get up to set temp cools down then d [ 1 Answers ]

Coleman evcon presidential furnace... heat runs but doesn't get to temp set on thermostat... ie. Thermostat is set at 71 and only runs to 66 then starts cool down faze. Restarts within muntes and sometimes during cool down faze

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

I set the temp, heat kicks on for 30 seconds, then shuts off [ 5 Answers ]

I know next to zilch when it comes to my heating and air system, so that's why I'm kind of led to believe this may be something simple. We have natural gas heat for our home. Lately, it's been a little cooler in the day so I've set the thermostat for about 73 degrees and switched the system over...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

Furnace won't maintain temp - shuts off [ 5 Answers ]

Furnace problem - Turn temp to 70 Furnace runs until 70 degrees Maintains temperature for awhile - probably for a couple of hours At some point it stops maintaining the temperature and keeps kicking on and off. I've watched the thermostat - I'll actually turn the temp up to try to get it to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.