 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Just installed a new Noma Programmable Thermostat. However the heat cycle time seems to be too short. It's set to 19.0 C. It turns on the furnace at 19.7 C for only 30 seconds at a time an then shuts off. This repeats many times in one hour. Is this thermostat functioning correctly?
Recently installed a noma programmable thermostat and same was working fine for three or four days but this morning the furnace kept running. Temp was set @67F but furnace was still running @ 79+F .The only way to stop the furnace was to manually shut it done.Why is it doing this and what must I do...
Which is a better way to save energy and keep your house warm. Manual or progamable therostats
I have a second hand Honeywell Thermostat that I was going to give to some one else to use as I already have one. I do not have instructions to go with this unit and I am only dealing with a two wire hook up. Can you tell me which screws I am to attach these to. Thanks and may God bless. Carl...
Does anyone know of a thermostat that has a programmable fan setting? I have a wood burning fireplace insert that works well in the winter but I would like to run the fan approx. 15 to 20 minutes each hour instead of the continuous "on" setting. Is there a thermostat that allows the fan setting...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
